Guides ยท Engineering
Beginner Electronics Multimeter Basics
Measure voltage, resistance, and continuity safely
This guide explains how to use a multimeter: choosing the right mode and range, measuring voltage and resistance, using continuity, and avoiding common mistakes that blow fuses or damage circuits.
- multimeter
- voltage
- resistance
- continuity
- electronics
Know the ports
Use the correct jack for volts/ohms vs current; current often requires a different fused port.
Measure voltage safely
Set to V, start on a higher range if manual, and probe across points without shorting.
Use resistance/continuity correctly
Measure resistance only on unpowered circuits; continuity is for quick open/short checks.
Avoid common errors
Never measure current with leads in the wrong port; replace blown fuses and recheck setup.
Keep Exploring
Guides
Intro to CAD Modeling
Learn the core CAD workflow for turning simple sketches into precise, editable 3D parts.
How it works
Air Traffic Control
Air traffic control coordinates aircraft movements to maintain safe separation.
Comparison
Hydrogen Car vs EV
Hydrogen cars make electricity from fuel onboard, while EVs store electricity directly in batteries.
Examples
Lever Simple Machine
A lever multiplies force by pivoting around a fulcrum, trading distance for mechanical advantage.